Dynamix UM-A User Manual page 87

I. Advance Configuration :
The RIP Per Interface Configuration page allows you to set the configuration for each
Interface (PVCs, PPP Sessions, USB and LAN).
Interface: This field allows you to choose the Interface (PVCs, PPP Sessions, USB and LAN),
for the RIP to be configured. The available selections are: IP Ethernet 0, IP USB 0, IP
PVC0...IP PVC7, IP BridgeMux 0, and any PPP user defined sessions (maximum of 16)
Enable: This field allows you to Enable (Yes) or Disable (No) the specified interface for RIP.
Supplier: This field allows you to select the Supplier Mode (RIP Transmit).
1. Disabled: The supplier transmit is disabled.
2. V1 BC: The supplier transmits in RIPv1 Broadcast.
3. V2 BC: The supplier transmits in RIPv2 Broadcast.
4. V2 MC: The supplier transmits in RIPv2 Multicast.
Listener: This field allows you to select the Listener Mode (RIP Receive)
1. V1: The listener receives the RIPv1 only.
2. V2: The listener receives the RIPv2 only.
3. V1+V2: This listener receives the both RIPv1 and RIPv2.
Current RIP Settings: This field displays the each interface's RIP status.
4/1 Port ADSL Router P 86