Dynamix UM-A User Manual page 39

"DNS Proxy" : The DNS proxy on the ADSL Router records the available DNS servers and
forwards DNS query messages to one of DNS servers.
"DNS Server" : This is the user defined DNS server URL name and IP. Default is
"Save Setting" : Clicking this will link the user to the "Save Settings" page.
B. Router Mode : Router Mode is used when there is more than one PC connected to the
LAN-side Ethernet port. This enables the ADSL WAN access to be shared with multiple
nodes on the LAN. Network Address Translation (NAT) is supported so that one WAN-side
IP address can be shared among multiple LAN-side devices. DHCP is used to serve each
LAN-side device and IP address. There are four encapsulation type for Router Mode :
i.
ii.
"DNS Proxy Enable/Disable" : When the DNS Proxy is Disabled, the
LAN port does not process the DNS query message. For the DHCP
requests from local PCs, the DHCP server will set the user-configured
DNS server as the DNS server. Then all DNS query messages will be
directly sent to the DNS servers. DNS Proxy is enabled by default.
"Auto Discovered Enable/Disable" : When enabled (default), the DNS
proxy will store the DNS server IP addresses obtained from DHCP client
or PPP into the table. All DNS query messages will be sent to the
dynamically obtained DNS server. Select this option when the DNS
Server address is unknown but provided (automatically) by the ISP.
"User Configured Enable/Disable" : When enabled, the DNS proxy
will use the user-configured DNS server. All DNS query messages will
be sent to the DNS server. Enter the DNS IP in the DNS Server field.
Select this option when the DNS Server address assigned by the ISP is
known. User Configured is disabled by default.
"Disable".
"URL Name Add/Delete" : This is the URL name for the DNS server.
This can be up to 255 characters.
"Host IP (Add Only)" : This is the IP address of the DNS Server.
PPPoA VC-Mux : If PPPoA VC-Mux mode is selected, manually enter
your "User Name", "Input Password" and "Confirm Password" then
click "Save Setting" after your configuration. Check with your ISP for
the VPI/VCI setting details.
PPPoA LLC : If PPPoA LLC mode is selected, manually enter your
"User Name", "Input Password" and "Confirm Password" then click
"Save Setting" after your configuration. Check with your ISP for the
VPI/VCI setting details.
4/1 Port ADSL Router P 38