Dynamix UM-A User Manual page 86

RIP: This field allows you to Enable or Disable the RIP session. The resulting RIP session
will monitor all network interfaces that are currently available for messages from other RIP
routers. RIP is disabled by default.
Border Gateway: RIP implements Border Gateway as specified in RFC 1058 and RFC 1723.
This limits all subnet routes and host routes to routers within that same network. Updates sent
outside that network will only include a single entry representing the entire network,
including all subnets and host-specific routes. The Border Gateway is enabled by default.
Supplier Interval: This field allows you to enter the Supplier Interval timer in seconds. This
timer specifies how often the RIP sends announcements as a RIP Supplier.
Note : Range for Supplier Interval field is 0 – 2147483647, default value is 30.
Expire Timeout: This field allows you to enter the Expire Timeout in seconds. This timer
specifies the expiration time of a route. When a route has not been updated for more than the
"expire" period of time, it is removed from the Route Table. This route is then invalidated
and remains in the internal RIP Route Table. It will be included in the RIP announcements to
let other routers know the changes.
Note : Range for Expire Timeout field is 0 – 2147483647, default is 180.
Garbage Timeout: This field allows you to enter the Garbage timer in seconds. This timer
specifies how long the expired and invalidated routes are kept in the Internal RIP Route
Table before they are removed from it.
Note : Range for Garbage Timeout field is 0 – 2147483647, default is 120.
4/1 Port ADSL Router P 85