Dynamix UM-A User Manual page 69

Session Name: This field allows you to select the session from the configured NAT Session
Name Configuration.
User's IP: This field allows you to assign the IP address to map the corresponding
NAT/NAPT sessions.
Number of NAT Configurations: This field displays the total number of NAT Sessions
entered.
Note: NAT allows only one entry (User IP) per session, while NAPT allows many entries
(User IPs) per session.
Available Sessions: This table will be displayed at the bottom of the page to show all the
available Session Names with their corresponding WAN Interface.
Number of Sessions: This field displays the total number of NAT Sessions entered.
II. NAT Session Name Configuration :
Session Name: This field allows you to enter a Session Name to help distinguish different
NAT Sessions for different interfaces among different PPP sessions and PVCs. The Session
Name can be up to 31 characters, and there can be up to 16 different NAT session names.
Interface: This field allows you to choose specific WAN Interfaces (PVC or PPP Session)
for NAT Session. The options for this field are PVC0 ... PVC7 and any PPP session that was
created by the user.
NAT Session Name Status: This table is displayed at the bottom of this page to show all the
NAT Session Names with their corresponding WAN Interfaces.
4/1 Port ADSL Router P 68