Configuration-Ppp - Dynamix UM-A User Manual

4.3.2.3 Configuration—PPP
A. PPP Configuration :
The PPP Configuration page allows you to configure multiple PPP sessions for each PVC.
Multiple PPP sessions enables you to set up different connection settings and be able to
toggle/choose those settings for each PVC. The ADSL Router can support up to total of 16 PPP
sessions, and each PVC can support up to 8 PPP sessions. The multiple PPP sessions may be
configured with any combination over 8 PVCs.
Session Name: This field allows you to enter a Session Name. This is user defined to help
distinguish different session for different PPP accounts and different PVCs.
PVC: This field allows you to choose the specific PVC for the PPP session.
Service Name: The Service Name of the PPP session is required by some ISPs. If the ISP
does not provide the Service Name, please leave it blank.
Account to Use: You must select an account created in PPP Account Configuration page
here.
Disconnect Timeout: The Disconnect Timeout allows you to set the specific period of time,
in minutes, to disconnect from the ISP. The default is 0, which means never disconnect from
the ISP.
Note : Range for Disconnect Timeout field is 0-32767, default value is 0.
PPP Idle Timer Config: This will link you to the PPP Disconnect Timer Configuration page.
4/1 Port ADSL Router P 60