Dynamix UM-A User Manual page 90

IV. DHCP :
DHCP Relay :
NONE: This will disable the DHCP server. Note that this setting will override the
DHCP Server Enable/Disable on the LAN configuration page.
DHCP Server (default): Select this to activate the DHCP server.
DHCP Relay: If it is enabled, the DHCP requests from local PCs will forward to
the DHCP server runs on WAN side. To have this function working properly,
please disable the NAT to run on router mode only, disable the DHCP server on the
LAN port, and make sure the routing table has the correct routing entry.
DHCP Relay Target IP: If DHCP Relay is enabled, DHCP requests are relayed to DHCP
Target IP on the WAN side.
V. IGMP Proxy :
IGMP Proxy: This is the global setting for IGMP Proxy. If it is enabled, then the enabled
IGMP Proxy on WAN PVCs will be working. Otherwise, no WAN PVC can have IGMP
Proxy working on it. System default is Disabled.
PPP Half Bridge: When PPP Half Bridge is enabled, only one PC is able to access the
Internet, and the DHCP server will duplicate the WAN IP address from the ISP to the local
client PC. Only the PC with the WAN IP address can access the Internet. System default is
Disabled.
PPP reconnect on WAN access: If enabled, the PPP session will automatically establish a
connection when a packet tries to access the WAN. System default is Disabled.
4/1 Port ADSL Router P 89