Dynamix UM-A User Manual page 51

A. Change Adapter : Click the "Change Adapter" tab to select the PVC Setting. Click "Submit after
your choice to view the setting/configurations details.
B. Main Setting :
Virtual Circuit: Select Enable to activate the current PVC configuration. The current PVC is
displayed at the top of the page in parenthesis. Default is Enabled for PVC0 and Disabled for
PVC1-PVC7.
VPI: Virtual Path Identifier is a virtual path used for cell routing that is identified by an eight
bit field in the ATM cell header. The VPI field specifies this eight bit identifier for routing.
Range for VPI field is 0-255, default is 0.
VCI: A Virtual Channel Identifier is a virtual channel that is identified by a unique numerical
tag that is defined by a 16-bit field in the ATM cell header. The purpose of the virtual
channel is to identify where the cell should travel. The VCI field specifies this 16 bit
numerical tag that determines the destination.
Range for VCI field is 0-65535, default is 35.
C. Static IP Settings :
Static IP Settings are for users who have a Static IP Address (WAN side) from their ISP.
IP Address: This is the static IP Address given by the ISP.
Range for IP Address is x.x.x.y, where 0
192.168.241.101.
Subnet Mask: This is the subnet mask given by the ISP.
Range for Subnet Mask is x.x.x.x, where 0
Gateway: This is the Gateway given by the ISP.
Range for Gateway is x.x.x.y, where 0
D. Encapsulation :
The different types of encapsulation include :
i. PPPoA VC-Mux
ii. PPPoA LLC
iii. 1483 Bridged IP LLC
iv. 1483 Routed IP LLC
v. 1483 Bridged IP VC-Mux
vi. 1483 Routed IP VC-Mux
vii. Classical IP over ATM
viii. PPPoE VC-Mux
ix. PPPoE LLC
x. PPPoE None.
¡ Ø ¡ Ø
x 255 and 1
¡ Ø x ¡ Ø 255, default is 255.255.255.0
¡ Ø ¡ Ø
x 255 and 1
4/1 Port ADSL Router
¡ Ø ¡ Ø
y 254, default is
¡ Ø ¡ Ø
y 254, default is 0.0.0.0.
P 50