Dynamix UM-A User Manual page 53

Service Name: The Service Name of the PPP session is required by some ISPs. If the ISP
does not provide the Service Name, please leave it blank.
User Name: Enter the PPP user name (provided by the ISP). The User Name can be up to 127
characters.
Note: You cannot have two different user accounts with the same account name. If a
different User Name with an already existing Account ID is submitted, it will replace the
previous account with that Account ID. You can have the same User Name and
Password for two different accounts (Account ID).
Password: Enter the PPP password (provided by the ISP). The Password is not needed to
delete or modify the account. The Password can be up to 127 characters.
Disconnect Timeout: The Disconnect Timeout allows you to set the specific period of time,
in minutes, to disconnect from the ISP. The default is 0, which means never disconnect from
the ISP.
Note : Range for Disconnect Timeout field is 0-32767, default value is 0.
MRU: The MRU (Maximum Receive Unit) field indicates the maximum size IP packet that
the peer of PPP connection (this device) can receive. During the PPP negotiation, the peer of
the PPP connection will indicate its MRU and will accept any value up to that size. The
actual MTU of the PPP connection will be set to the smaller of the two (MTU and the peer's
MRU). In the normal negotiation, the peer will accept this MRU and will not send packet
with information field larger than this value.
Note : Range for MRU field is 0-32767, default value is 1492.
MTU: Maximum Transmission Unit (MTU) is the largest size packet that can be sent by the
modem. If the network stack of any packet is larger than the MTU value, then the packet will
be fragmented before the transmission. During the PPP negotiation, the peer of the PPP
connection will indicate its MRU and will accept any value up to that size. The actual MTU
of the PPP connection will be set to the smaller of the two (MTU and the peer's MRU).
Note : Range for MTU field is 0-32767, default value is 1492.
MSS: Maximum Segment Size is the largest size of data that TCP will send in a single,
unfragmented IP packet. The LAN client and the WAN host will indicate their MSS during
the TCP connection handshake.
Note : Range for MSS field is 0-32767, default value is 1432.
Lcp Echo Interval: This is the time interval, in seconds, between PPP session connection
attempts.
Note :Range for Lcp Echo Interval field is 0-32767, default value is 10.
Lcp Echo Maximum Consecutive Failure: This is the number of times a PPP session can fail
while trying to connect before stopping. If a PPP session fails this number of times, you must
manually reconnect the PPP session.
Note : Range for Lcp Echo Maximum Consecutive Failure field is 0-32767,
default value is 6.
4/1 Port ADSL Router P 52