Status - Adsl - Dynamix UM-A User Manual

4.3.1.3 Status – ADSL
The ADSL Status page shows the ADSL physical layer or link status. The information displayed on
this page is either inherent to the ADSL Router or set by the ADSL Central Office (CO) DSLAM,
neither of which cannot be changed by the user. This page contains information that is dynamic and
will refresh every 2 seconds.
Showtime Firmware Version: This field displays the ADSL data pump firmware version
number.
Line State: This field displays the ADSL connection process and status. The different states
for this field are as follows:
Activation: The ADSL Router is in this state when it is attempting to start the
activation process.
Initialization: The ADSL Router is initializing handshake with the CO.
Training: This is a part of the handshake process with the CO.
Channel Analysis: This is a part of the handshake process with the CO.
Exchange: This is a part of the handshake process with the CO.
Down: This indicates that the ADSL connection is down.
Showtime: This indicates that a connection has been established between the
ADSL Router and the CO.
Modulation: This field displays the ADSL modulation status, which can either be G.dmt or
T1.413.
Annex Mode: This field displays the ADSL annex mode, which can either be Annex A or
Annex B.
4/1 Port ADSL Router P 46