Dynamix UM-A User Manual page 63

Example : Create a PPP session and connect it to the ISP?
To create and connect a PPP session, follow the steps below:
First you must create a PPP account. To do this, go to PPP Configuration page and click on
PPP Account Configuration. Enter the appropriate Acct ID, User Name, and Password, make
sure Add/Modify is currently selected in the dropdown menu, and click Submit.
Got back to the PPP Configuration Page by clicking Go back to PPP Configuration. Type in
an appropriate Session Name and select the account you just created in the Account to Use
dropdown menu. Everything else has default values, which you can modify to suit your needs.
Make sure Add/Modify is currently selected in the dropdown menu, and click Submit.
The PPP session has been created. Now you must go to the PPP Status page, select the
connection (session), and click Execute. The PPP session should then connect.
Save Configuration : Clicking this will link you to the Save Settings / Reboot page.
B. PPP Account Configuration :
To begin PPP Session configuration, you must first go to the PPP Account Configuration page
(below) to set up an account. The link to this page can be found on the PPP Configuration page.
On the PPP Account Configuration page, you must configure the Account ID, User Name and
Password.
Account ID: This field allows you to create an account ID to help distinguish different
accounts, up to 16 maximum. The Account ID can be up to 31 characters.
User Name: Enter the PPP user name (provided by the ISP). The User Name can be up to 127
characters.
Note: You cannot have two different user accounts with the same account name. If a
different User Name with an already existing Account ID is submitted, it will replace the
previous account with that Account ID. You can have the same User Name and
Password for two different accounts (Account ID).
4/1 Port ADSL Router P 62