Firewall Databases - Ip Group - Dynamix UM-A User Manual

4.3.3.16.2.1 Firewall Databases – IP Group
The IP Group lets you specify IP Addresses (Single or Range) and Subnet Masks and assign them to a
group name for easy use when configuring inbound and outbound policies for the firewall.
IP Entry Name: This is the name you assign to the group of IP addresses and subnet masks.
The IP Entry Name can be up to 19 characters.
IP addr. 1: This is the IP address or subnet mask you are specifying when creating a group.
IP addr. 2: This field is only active if you select to group a range of IP addresses or subnet
masks, in which case this is the end address of that range whereas the IP addr 1 is the first
address of that range.
IP/Mask: This field allows you to specify the address type assigned to the group.
Single IP: This will let you specify one IP address for a given group.
IP Range: This will let you specify a range of IP addresses for a given group,
starting with IP addr 1 and ending with IP addr 2.
Subnet Mask: This will let you specify a range of subnet masks for a given group.
4/1 Port ADSL Router P 107