Dynamix UM-A User Manual page 21
4/1 port
Hide thumbs
Also See for UM-A:
- User manual (197 pages) ,
- Quick start manual (10 pages) ,
- Quick start manual (12 pages)
Table of Contents
Advertisement
Follow the following steps or instructions for connecting your 4 Port ADSL Router :
1.
Turn off your computer.
2.
Connect the ADSL port of your 4 Port ADSL Router to the splitter DSL port with a RJ-11
cable.
3.
Connect the Ethernet cable ( RJ-45 ) from your 4 Port ADSL Router to the Ethernet Adaptor
in your computer.
4.
Connect the Power adaptor to the 4 Port ADSL Router and plug the other end into a Power
outlet.
5.
Turn on your 4 Port ADSL Router.
The Power light will lit after turning on the 4 Port ADSL Router.
Auto and self diagnostic process will turn the LED indicators ON and OFF during
!
the process.
6.
Turn on your computer.
7.
Refer to the next chapter to setup or configure your Network Adaptor.
4/1 Port ADSL Router
P 20
Advertisement
Table of Contents
