Admin Privilege - Learned Mac Table - Dynamix UM-A User Manual

4.3.3.5 Admin Privilege – Learned MAC Table
Network bridges operate at the physical network layer. The purpose of a bridge is to connect two or
more networks and enable packet sharing between them. Bridges are different from routers because
they forward packets based on physical addresses, whereas routers use IP address to forward packets.
Bridges must learn all the physical (MAC) addresses of the devices so it can forward the packets
reliably. The purpose of the Learned MAC Table is to store and display these bridge-recognized
MAC addresses.
The Learned MAC Table page shows the current learned Bridge MAC table. This page contains
information that is dynamic and will refresh every 8 seconds.
Aging Timeout: This field allows you to enter the update period for the MAC table. Have this
number lower if you want a more frequent refresh rate.
Note :Range for Aging Timeout field is 0 – 32767, default is 100.
4/1 Port ADSL Router P 83