Dynamix UM-A User Manual page 25

Follow the following steps or instructions for connecting your 1 Port ADSL Router :
8. Turn off your computer.
9. Connect the ADSL port of your 1 Port ADSL Router to the splitter DSL port with a RJ-11
cable.
10. Connect the Ethernet cable ( RJ-45 ) from your 1 Port ADSL Router to the Ethernet Adaptor
in your computer.
11. Connect the Power adaptor to the 1 Port ADSL Router and plug the other end into a Power
outlet.
12. Turn on your 1 Port ADSL Router.
The Power light will lit after turning on the 1 Port ADSL Router.
Auto and self diagnostic process will turn the LED indicators ON and OFF during
!
the process.
13. Turn on your computer.
14. Refer to the next chapter to setup or configure your Network Adaptor.
4/1 Port ADSL Router P 24