I. PANEL DESCRIPTION----- 1 PORT ADSL ROUTER II. CONNECTING YOUR ADSL ROUTER----- 1 PORT III. SET UP TCP/IP IN WINDOWS -A W ME / 98 PTION INDOWS -B W 2000 PTION INDOWS -C W PTION INDOWS IV. SET UP ADSL ROUTER Dynamix UM-A...
II. Panel Description - Dynamix UM-A ADSL Router 1. Front Panel Steady Green light indicates theDynamix UM-A ADSL Routeris powered on. LINK/ACT Blinking when Dynamix UM-A ADSL Router is actively sending/receiving data. Blinking when data communication is active. ADSL Lit when a successful ADSL connection is established.
C. Connect your ADSL Line from the Splitter or Microfilter to the ADSL port of the Dynamix UM-A ADSL Router. D. Connect the AC Power Adaptor to the Dynamix UM-A ADSL Router and the other end of the adaptor to the wallet.
Enter key to login. Enter the default User Name “admin” and Password “epicrouter”. Then press “OK” to login. Click “Automatic Setup” and follow the following steps to help you install the ADSL Router quickly and easily. Dynamix UM-A...
Page 9
For some specific Encapsulation, you might need to fill in your “User Name” and “Password”. Check your ISP for the setting/configuration details. Click and select “Manual Setup” if you can’t find any available parameters from the country list. Check your ISP immediately for the setting/configuration details. Dynamix UM-A...
Page 10
Click “Save Setting” after your choice. STEP 2. Dynamix UM-A ADSL Router system will reboot and activate your setting. Click “Back To Home” after the reboot process. Connection to the Internet is available after the above process. Dynamix UM-A...