Appendix D Network Setup Guide; Windows Xp/2000 - Dynamix UM-A User Manual

Appendix D Network Setup Guide

To configure your computer to connect to the Internet through a LAN, refer to the instructions or help
guide provided with your Operating System.
It is recommended that the network address of the client PC to be configured as a dynamic IP address.
This will give your DHCP server full control of IP Addresses and DNS Servers:
D.1 Windows XP/2000
Click on Start Menu¡ ÷ Setting¡ ÷ Control Panel. In the Control Panel, double click on the
Network Connections (Network and Dialup Connections in Windows 2000) icon.
Double click the Local Area Connection icon. Under the General Tab, click the Properties
button.
Select Internet Protocol (TCP/IP) and click the Properties button.
Under the General Tab, make sure that the Obtain an IP address automatically and Obtain
DNS Server Address Automatically options are selected. If they are not selected, select them
and click the OK button. This will make your IP dynamic, allowing it to change each time
you connect/disconnect.
4/1 Port ADSL Router P 136