Chapter 3. Administrator's Computer Setting - Dynamix UM-A User Manual

Chapter 3. Administrator's Computer Setting

The instruction in this section will help you configure your computers to be able to communicate with
this ADSL Router.
Computers access the Internet using a protocol called TCP/IP (Transmission Control Protocol/ Internet
Protocol). Each computer on your network must have TCP/IP installed and selected as its networking
protocol. If a Network Interface Card (NIC) is already installed in your PC, then TCP/IP is probably
already installed as well.
The following description assumes the ADSL Router been set to factory default. (If not, please hold the
reset button down for 10 seconds). The default ADSL Router's LAN IP is 10.0.0.2.
Follow the procedures below to set your computer function as a DHCP Client.
4/1 Port ADSL Router P 25