Admin Privilege - Route Table - Dynamix UM-A User Manual

4.3.3.4 Admin Privilege – Route Table
The Route Table page displays the routing table and allows you to manually enter a routing entry. The
routing table will display the routing status of Destination, Netmask, Gateway, and Interface. The
interface br0 indicates the USB interface; lo0 indicates the loopback interface; ppp1 indicates the PPP
interface. The Gateway is the learned Gateway.
The Gateway field of the static route entry allows users to either enter a Gateway IP address
or select a Network Interface.
All user-defined routes retained in the CPE memory, regardless if they are already in the
Routing Table, are displayed on the same Route Table page.
All user defined route entries kept in the CPE memory during run time are saved to flash
when the user chooses to save and reboot the CPE. When the CPE restarts, it reloads all
saved user-defined routes to the CPE memory and tries to apply to the system.
4/1 Port ADSL Router P 81