Dynamix UM-A User Manual page 40

iii. PPPoE VC-Mux : If PPPoE VC-Mux mode is selected, manually enter
your "User Name", "Input Password" and "Confirm Password" then
click "Save Setting" after your configuration. Check with your ISP for
the VPI/VCI setting details.
iv. PPPoE LLC : If PPPoE LLC mode is selected, manually enter your
"User Name", "Input Password" and "Confirm Password" then click
"Save Setting" after your configuration. Check with your ISP for the
VPI/VCI setting details.
PPP Half Bridge: Although the Router mode is capable of terminating the PPP in the
modem and hence does not require PPPoE client software on the host PC, there are some
disadvantages to Router mode when only single-user support is required. For instance, Router
mode uses NAT which requires ALG support. PPP Half Bridge also terminates the PPP in the
modem and does not require a PPPoE client on the PC. However, PPP Half Bridge does not
use NAT and is not limited by ALGs. PPP Half Bridge will work with Ethernet interface to
the PC.
Single-User Mode: Only one computer is connected at the LAN side through Ethernet.
Multi-User Mode: Multiple computers are connected at the LAN side through Ethernet.
4/1 Port ADSL Router P 39