Chapter 4. Device Administration; Login - Dynamix UM-A User Manual

For your convenience, an Administrative Utility has been programmed into the ADSL Router. This
chapter will explain all the functions in this utility. All ADSL Router based administrative tasks are
performed through this web utility.

4.1 Login

Levels of Access : There are two levels of access rights/privileges for the ADSL Router:
Administrator : User name admin, the administrator account has complete read/write access
on all pages (Status, Configuration, Admin Privilege, and Firewall Configuration). Admin
account also has FTP server access.
User : User name user, the User account has read/write access to pages under the Status and
Configuration sections.
The following steps will enable you to log into the ADSL Router.
1. Launch the Web browser (Internet Explorer, Netscape, etc.).
2. Enter the LAN port default IP address (default gateway)
3. Entry of the username and password will be prompted. Enter the default login User Name and
Password :
The default login User Name of the administrator is "admin", and the default login Password
is "epicrouter".
The default login User Name for the non-administrator is "user", and the default login
Password is "password".
4. Remember my password check box : By default, this box is not checked. Users can check this box
so that Internet Explorer will remember the User name and Password for future logins. It is
recommended to leave this box unchecked for security purposes.

Chapter 4. Device Administration

http://10.0.0.2
4/1 Port ADSL Router
in the address bar.
P 29