Remote Network Management - Dynamix DV-24 User Manual

4.2 Remote Network Management

IP Setting
It must assign an IP for the IP DSLAM via the console port (RS-232 Port) before users configure the VDSL IP DSLAM
via Telnet and Web. Or users can modify the PC/Laptop's IP domain same as the VDSL IP DSLAM and use the
manufacturer default IP to configure the VDSL IP DSLAM.
1. Remote control by "Telnet"
To enter Telnet, type the IP address of the VDSL switch to connect management system. And type User name and
password.
Default User Name: admin
Default Password: 123
Note:
2. For the security reason, the device limits the numbers of user login via Telnet and Console port. User can't login
the device via Telnet and Console port at the same time.
User must log-out to leave after finish configures the device via Consol port, or the user can't login via Telnet.
3. WEB management doesn't limit the numbers of user login.
24VDSL+2Giga Ethernet Managed 4 Band VDSL IP DSLAM USER'S MANUAL Ver. A.4
23