Pickup Retry Operation - Canon iR5000i Service Manual

2.1.3 Pickup Retry Operation

If the retry sensor (PS19, PS20, PS21, PS22) detects a delay (as caused by wear on the
pickup roller), the machine executes pickup retry operation.
If a delay is detected once again after a retry, the machine will indicate the Jam message
in its control panel.
The following is the sequence of retry operations:
Pickup roller
Pickup roller
DOWN solenoid
Retry sensor
Vertical path
sensor
COPYRIGHT © 2001 CANON INC.
Pickup motor
Pickup roller
F05-201-05
Delay detected
Start key ON
*1
*1 : Period of detection, determined by the clock pulses from the motor.
F05-201-06
2000 2000 2000 2000
CHAPTER 5 PICK-UP/FEEDING SYSTEM
M
Retry sensor
Retry started
CANON iR5000i/iR6000i REV.0 JUNE 2001
Thereafter, same as normal
pickup sequence.
5-9 P