Unpacking - Canon iR5000i Service Manual

2.3 Unpacking

Step
1 Unpack the machine, and remove the plastic
sheets.
Do not remove the tape used to secure
the two adjusters[1] found on the machine's
bottom (front) until the machine has been
moved off the skids.
Otherwise, the adjusters can trip on the slope
plates, causing the machine to tumble.
2 Take out and open the cardboard box, and fit the
grip[2] to the front of the machine.
Be sure to orient the stopper as shown
when inserting it. Otherwise, it can slip off
when the body is being lifted.
3 Take out the two slope plates from inside the
skid.
4 Holding the two grips (front, rear) found on the
side of the delivery assembly, lift the machine
slightly to remove the pad.
(weight of the machine: about 210 kg)
COPYRIGHT © 2001 CANON INC.
Work
2000 2000 2000 2000 CANON iR5000i/iR6000i REV.0 JUNE 2001
CHAPTER 3 INSTALLATION
Checks/remarks
[1]
[2]
3-5 S