Canon iR5000i Service Manual page 515

3.2.3 Changing the Deck Paper Size Configuration
If the deck paper size configuration must
be changed to suit the needs of the user,
perform the following:
1) Open the compartment of the deck, and
remove all paper.
2) If the lifter of the deck is up, turn on the
host machine; then, push down the sen-
sor lever [2] of the paper supply posi-
tion sensor located inside the compart-
ment [1] to move the lifter to its lower
limit.
3) Remove the screw [3], and mount the
paper rear end guide plate [4] to suit the
new paper size.
4) Remove the front cover.
5) Remove the screw [5], and mount the
left/right guide plate [6] to suit the new
paper size.
6) Enter the new paper size using the ser-
vice mode of the host machine
(COPIER>OPTION>ACC>DK-P; 0:
A4, 1: B5, 2: LTR).
COPYRIGHT © 2001 CANON INC. 2000 2000 2000 2000 CANON iR5000i/iR6000i REV.0 JUNE 2001
CHAPTER 8 PAPER DECK
[2]
F08-302-08
[4] [3] [5]
[6]
F08-302-09
[1]
8-29 P