Canon iR5000i Service Manual page 795

Hide thumbs Also See for iR5000i:

Table of Contents

CHAPTER 5 SERVICE MODE

Use it to enter data for changing the position of measurement on the stan-

dard white plate used for shading correction.

216 to 296 (a multiple of 8 causes a shift of about 0.189 mm)

• If dirt is found on the copyboard glass, execute this mode to avoid the

area when reading the standard white plate.

• You must execute the following if you have changed the setting:

COPIER>FUNCTION>CCD>SH-PS-ST.

Standard white plate

Higher setting

Copyboard glass

Lower setting

2000 2000 2000 2000

CANON iR5000i/iR6000i REV.0 JUNE 2001

COPIER>FUNCTION

Chapters

Table of Contents

Ir6000i Image reader-a1