Canon iR5000i Service Manual page 372

3) Disconnect the connector [3], and re-
move the screw [4]; then, detach the
guide plate [5].
4) Remove the E-ring [6] from the front of
the roller shaft, and move the bearing
[7] toward the inside; then, detach the
vertical path roller 2 [8].
9.3.3 Removing the Vertical Path Roller 3/4
1) Remove the cassette pickup assembly.
2) Remove the following from the front:
E-ring [1], 1 pc.
spacer [2], 1 pc.
bearing [3], 1 pc.
3) Remove the following from the rear:
E-ring [4], 3 pc.
bushing [5], 2 pc.
roller mount [6]
blue gear [7]
parallel pin [8]
4) Remove the vertical path roller 2/3 [9].
COPYRIGHT © 2001 CANON INC. 2000 2000 2000 2000 CANON iR5000i/iR6000i REV.0 JUNE 2001
CHAPTER 5 PICK UP/FEEDING SYSTEM
[3]
F05-903-04
[6]
[7]
F05-903-05
[7]
[4]
[5]
F05-903-06
[4]
[5]
[8]
[8]
[5]
[2]
[3]
[1]
[6]
[9]
5-65 P