Canon iR5000i Service Manual page 816

TR-SP-C2
Use it to switch the transfer/separation output level when the left deck is
used as the source of paper to prevent various problems.
Settings 0: normal (default), 1: to prevent re-transfer
2: to prevent separation fault, 3: to prevent transfer fault
TR-SP-C3
Use it to switch the transfer/separation output level when the cassette 3 is
used as the source of paper to prevent various problems.
Settings 0: normal (default), 1: to prevent re-transfer
2; to prevent separation fault, 3: to prevent transfer fault
TR-SP-C4
Use it to switch the transfer/separation output level when the cassette 4 is
used as the source of paper to prevent various problems.
Settings 0: normal (default), 1: to prevent re-transfer
2: to prevent separation fault, 3: to prevent transfer fault
TR-SP-MF
Use it to prevent the transfer/separation output level when the manual feed
tray is used to prevent various problems.
Settings 0: normal (default), 1: to prevent re-transfer
2: to prevent separation fault, 3: to prevent transfer fault
TR-SP-DK
Use it to switch the transfer/separation output level when the paper deck is
used as the source of paper to prevent various problems.
Settings 0: normal (default), 1: to prevent re-transfer
2: to prevent separation fault, 3: to prevent transfer fault
TPR-DECL
Use it to switch the delivery path to improve stacking performance in re-
verse delivering thick paper.
Settings 0: normal (default), 1: move paper over reversing roller, and reverse/
delivery after removing curl
IFAX-LIM
Use it to control the number of output lines if a large amount of data arrives
in i-FAX.
0 to 999 (default: 500)
W/SCNR
Use it to indicate the presence/absence of a scanner for a copier model:
Settings 0: printer model (default)
1: model with scanner
COPYRIGHT © 2001 CANON INC. 2000 2000 2000 2000 CANON iR5000i/iR6000i REV.0 JUNE 2001
CHAPTER 5 SERVICE MODE
COPIER>OPTION
5-83 T