Canon iR5000i Service Manual page 34

4.3 Extension Mode
Mode
Two-Page Separation
Transparency Interleaving
Shift
Cover/Sheet Insertion
Different Size Originals
Margin
Frame Erase
Image Combination
Image Separation
Nega/Posi
Sharpness
Mode Memory
Recall
Booklet
Image Repeat
Job build
Extra-Length
COPYRIGHT © 2001 CANON INC.
Use it to copy left and right pages (as of an open book)
on separate sheets by a single operation.
Use it to insert a sheet of paper between transparencies
in transparency mode.
Use it to move the entire original image to the center
or a corner.
Use it to print on a sheet of a type different from the one
used for the body to serve as a front/back/chapter cover.
Use it to copy originals of different sizes
(different horizontal lengths or different sizes) on sheets
of corresponding sizes.
Use it to create a margin on the edge of a copy for binding.
Use it to erase the image of the frame or holes of an
original from its copy.
Use it to reduce 2, 4, or 8 originals automatically to
print on a single sheet.
Use it to enlarge a single original automatically by
dividing it into 2 or 4 to print on a sheet of a selected size.
Use it to reverse the black and white areas of the original
on its copies.
Use it to increase the black-and-white contrast of an
original on its copies.
Use it to store or recall a copying mode.
(Maximum nine modes.)
Use it to call as many as three stored copying modes.
Use it to copy single- or double-sided originals in such
a way to enable making a booklet.
Use it to repeat an image of the original vertically/
horizontally as many times as specified (until the sheet is full).
Use it to copy separately placed sets of originals at once.
Use it when making copies of an original of a non-default
length (manual feed mode; needs selection in service mode:
COPIER>OPTION>USER>MF-LG-ST).
T01-403-01 List of Functions
2000 2000 2000 2000 CANON iR5000i/iR6000i REV.0 JUNE 2001
CHAPTER 1 GENERAL DESCRIPTION
Description
1-21 S