Canon iR5000i Service Manual page 386

3) Remove the two mounting screws [4],
and detach the duplex feeding fan [5].
Be sure that the arrow indicat-
ing the direction of air is as in-
dicated when mounting the du-
plex feeldng fan.
9.6.17 Mounting the Reversing Flapper Solenoid
1) Adjust the position of the solenoid us-
ing two screws [2] so that the drive le-
ver [1] is fully pushed when the sole-
noid turns on (i.e., the plunger is
drawn).
COPYRIGHT © 2001 CANON INC. 2000 2000 2000 2000 CANON iR5000i/iR6000i REV.0 JUNE 2001
CHAPTER 5 PICK UP/FEEDING SYSTEM
[5]
F05-906-27
F05-906-28
[4]
[1]
[2]
5-79 P