Canon iR5000i Service Manual page 221

CHAPTER 3 LASER EXPOSURE SYSTEM
5) Remove the tape fixing screw of the
right cover.
6) Remove the screw [8], and detach tje
developing assembly locking unit [9].
Remove the four screws [10], and de-
tach the scanner cover [11].
7) Disconnect the connector [12], and slide
out the developing assembly [13]; then,
detach the hopper slot [14].
Disconnect the four connectors [15],
and remove the four screws [16]; then,
slide out the scanner unit [17].
When replacing the scanner
unit, be sure to execute the fol-
lowing in service mode if the
fixing assembly is 150°C or
higher; otherwise, potential con-
trol will not be executed:
COPIER>FUNCTION>DPC>DPC.
3-12 P
COPYRIGHT © 2001 CANON INC.
[10]
[8]
F03-501-04
[14] [16]
[12]
F03-501-05
2000 2000 2000 2000 CANON iR5000i/iR6000i REV.0 JUNE 2001
[11] [10]
[9]
[17] [15]
[15]
[13] [16]