Drum Cleaner; Construction; Removing The Cleaning Blade - Canon iR5000i Service Manual

7.11 Drum Cleaner

7.11.1Construction

7.11.2 Removing the Cleaning Blade

1) Slide out the process unit from the ma-
chine. (See p. 4-54P.)
2) Remove the primary charging assembly.
3) Disconnect the connector [1] of the AC
line of the drum heater.
4) Remove the four mounting screws [2],
and detach the cleaning blade assembly
[3].
5) Remove the E-ring [4] from under the
cleaning blade assembly, and detach the
pressure spring [5].
COPYRIGHT © 2001 CANON INC. 2000 2000 2000 2000 CANON iR5000i/iR6000i REV.0 JUNE 2001
CHAPTER 4 IMAGE FORMATION SYSTEM
F04-711-01
[3]
F04-711-02
[5]
F04-711-03
Cleaning blade
Separation claw
[2]
[1]
[4]
4-79 P