Backing Up Data; Before The Work; Making Connections - Canon iR5000i Service Manual

8.2 Backing Up Data

8.2.1 Before the Work

• Store the system to the Service Support Tool. (Make sure that the version of the system
is the same as that of the host machine.)
• Turn off the main power switch of the host machine; then, disconnect the power plug,
and disconnect the network cable.

8.2.2 Making Connections

1) Connect the PC to the parallel connector on the right side of the controller with a paral-
lel cable.
• The PC must remain off.
• The 25-pin connector of the PC must be connected to the PC, while the 36-pin connec-
tor is connected to the Service Support Tool.
2) Turn on the PC, and start up the Service Support Tool.
3) Connect the power plug of the host machine to the power outlet, and turn on the main
power switch.
4) Start service mode.
5) Make the following selections: COPIER>FUNCTION>SYSTEM>DOWNLOAD so that
the host machine will be in download standby mode (notation 'STNDBY').
COPYRIGHT © 2001 CANON INC.
CHAPTER 4 TROUBLESHOOTING IMAGE FAULTS/MALFUNCTIONS
2000 2000 2000 2000 CANON iR5000i/iR6000i REV.0 JUNE 2001
4-103 T