The Print Has Fixing Faults - Canon iR5000i Service Manual

CHAPTER 4 TROUBLESHOOTING IMAGE FAULTS/MALFUNCTIONS

3.14 The print has fixing faults

Paper
1) Is the paper of a type that has poor fixing performance (e.g., thick pa-
per)?
YES: Set '2' (thick paper mode) in service mode:
Perform the following, and advise the user:
a.
b.
2) Is the paper of a recommended type?
NO:
Fixing assembly
3) Does the problem occur vertically?
YES: Check the fixing roller for scratches and dirt.
NO:
4-14 T
COPIER>OPTION>BODY>FSPD-S.
Set the source of paper (cassette, deck) to 'Heavy'.
Additional Function>common settings>store paper type>source of
paper>'Heavy'
Advise the user to always use the selected source of paper (after
depositing thick paper) whenever using thick paper.
Try using recommended paper. If the results are good, advise the
user to use recommended paper.
Check the fixing roller for nip.
COPYRIGHT © 2001 CANON INC. 2000 2000 2000 2000 CANON iR5000i/iR6000i REV.0 JUNE 2001