Fixing Heater And The Control Parts; Removing The Main/Sub Heater - Canon iR5000i Service Manual

Hide thumbs Also See for iR5000i:

Table of Contents

4.3 Fixing Heater and the Control Parts

1) Remove the fixing assembly from the

2) Remove the two fastons [1] and the two

screws [2] at the rear; then, detach the

heater positioning plate (rear) [3].

3) Remove the screw [4] and the faston [5]

at the front, and detach the harness

The harness is equipped with a

tie-wrap. Be sure to use a new

tie-wrap if you have cut the tie-

4) Remove the screw [7], and detach the

heater positioning plate (front) [8].

5) Remove the main heater and the sub

2000 2000 2000 2000

CANON iR5000i/iR6000i REV.0 JUNE 2001

CHAPTER 6 FIXING SYSTEM

Table of Contents

Ir6000i Image reader-a1