Connecting To A Wan; Connecting To A Lan; Figure 2 Connecting The Biguard S10 To A Wan; Figure 3 Connecting The Biguard S10 To A Lan - Billion BiGuard S10 Administration Manual

Connecting to a WAN

Connect an RJ-45 Ethernet cable to the WAN port on the BiGuard S10, connect the other end to
an ADSL modem, cable modem, or another router.
FIGURE 2

Connecting to a LAN

Connect switches, hubs, and servers to the four LAN connectors on the BiGuard S10.
FIGURE 3
C B G
ONNECTING THE I UARD
C B G
ONNECTING THE I UARD
Setting up the BiGuard S10
S10 WAN
TO A
S10 LAN
TO A
21