BiGuard 50G ONNECTING THE Carefully unpack the BiGuard 50G and check that the following items are in- cluded. 1. BiGuard 50G x 1 2. Power adapter x 1 3. Warranty card x 1 4. Software CD x 1 5. Ethernet cable x 1 6.
Page 4
50G will be ready for operation. You can configure and manage the BiGuard 50G with the Web Manager. The Web Manager is a web-based inter- face that you can access from any web browser. In the Address field of your Web browser,...
Password: admin Then click OK. The Web Manager opens on the Status menu. To configure the WAN for PPPoE, you need the following information from your ISP provider and since BiGuard 50G is Dual WAN, you can choose either WAN1...
Click Apply to confirm the settings. To configure the WAN for static IP, you will need the following information from your ISP provider. You can set up to 4 static IPs all at once IP address Subnet mask Gateway Click Quick Start in the Menu bar.
Page 7
Type the subnet mask in the IP Subnet Mask field. Type the gateway in the ISP Gate- way Address field. Type the primary/secondary DNS in the Primary DNS and Secondary DNS fields. Click Apply to confirm the settings. Click Quick Start in the Menu bar.