Configuring The Dmz; Figure 37 Setting Wan Bandwidth; Figure 38 Enabling The Dmz - Billion BiGuard S10 Administration Manual

C WAN B
ONFIGURING ANDWIDTH PARAMETERS
This menu item enables you to set the maximum WAN outbound and inbound bandwidth that
your ISP can provide.
FIGURE 37 S
ETTING
WAN Outbound Type the maximum outbound bandwidth that is provided by your ISP.
Bandwidth
WAN Inbound Type the maximum inbound bandwidth that is provided by your ISP.
Bandwidth

Configuring the DMZ

Click DMZ to enable or disable the DeMilitarized Zone:
FIGURE 38 E
NABLING THE
The DMZ is a section of the network that is located between an organization's trusted internal
network and an untrusted external network such as the Internet. The DMZ is a subnet that is
located between firewalls or off one leg of a firewall.
Click the DMZ drop-down menu to select Disable or Transparent.
When set to transparent mode, all interfaces behave as though they are part of the same net-
work, and the firewall filters packets pass through the firewall without modifying any of the
source or destination information in the IP packet header
WAN
BANDWIDTH
DMZ
Configuring the BiGuard S10 43