Related Manuals for Billion SG6200NXL
Summary of Contents for Billion SG6200NXL
- Page 1 SG6200NXL/ZigBee Single Meter Quick Start Guide www.billion.com.tw www.smartgrid.com.tw...
- Page 2 Chapter 1: Pair ZigBee Meter to SG6200NXL Chapter 2: Network Configuration 2.1 Configuring a PC in Windows 7 2.2 Configuring a PC in Windows XP Chapter 3: Factory Default Settings Chapter 4: Information from your ISP Chapter 5: Configuring with your Web Browser Internet connection 5.1.1 EWN...
- Page 3 Chapter 10: SG3010-T4/SG3015-T4 Testing 10.1 Quick Installation for Testing 10.2 ZigBee Configuration 10.3 Remote Metering Chapter 11: SG3010-iCB Testing 11.1 Quick Installation for Testing 11.2 ZigBee Configuration 11.3 Remote Control 11.4 Remote Metering Chapter 11: BEsmart APP testing www.billion.com.tw www.smartgrid.com.tw...
-
Page 4: Chapter 1: Pair Zigbee Meter To Sg6200Nxl
If Status LED lit green that mean ZigBee Meter is waiting mode, please go STEP 3 If Status LED blinking green that mean ZigBee Meter has been pair other SG6200NXL, Before pair ZigBee Meter with SG6200NXL, please refer ZigBee Meter UM to do un-pairing. -
Page 5: Chapter 2: Network Configuration
Control Panel. Then click on Network and Internet. When the Network and Sharing Center window pops up, select and click on Change adapter settings on the left window panel. Select Local Area Connection, and right click icon select Properties. www.billion.com.tw www.smartgrid.com.tw... - Page 6 In the TCP/IPv4 properties window, select the Obtain address automatically and Obtain Server address automatically radio buttons. Then click OK to exit the setting. Click OK again in the Local Area Connection Properties window to apply the new configuration. www.billion.com.tw www.smartgrid.com.tw...
- Page 7 3. In the Local Area Connection Status window, click Properties. 4. Select Internet Protocol (TCP/IP) and click Properties. 5. Select the Obtain an IP address automatically and the Obtain DNS server address automatically radio buttons. 6. Click OK to finish the configuration. www.billion.com.tw www.smartgrid.com.tw...
-
Page 8: Chapter 3: Factory Default Settings
Chapter 3: Factory Default Settings Before configuring the Billion SG6200NXL router, you need to know the following default settings. Web Interface: (Username and Password) Username: admin Password: admin The default username and password are “admin” and “admin” respectively. Device LAN IP settings IP Address: 192.168.1.254... -
Page 9: Chapter 4: Information From Your Isp
DHCP Client (it can be automatically assigned by your ISP Obtain an IP Address when you connect or be set manually). Automatically IP address, Subnet mask, Gateway address, and Domain Fixed IP Address Name System (DNS) IP address (it is fixed IP address). www.billion.com.tw www.smartgrid.com.tw... -
Page 10: Chapter 5: Configuring With Your Web Browser
Chapter 5: Configuring with your Web Browser Open your web browser, enter the IP address of your SG6200NXL, which by default is 192.168.1.254, and click “Go”, a user name and password window prompt appears. Enter the user name and password that your Administrator has set for you and select the Account Type, then click Login. -
Page 11: Internet Connection
Protocol: The current protocol in the device. Click on Continue to choose the Protocol to connect with EWAN or click Jump to Wireless Setting to use Protocol: Obtain an IP Address Automatically to connect and setup wireless settings at the same time. www.billion.com.tw www.smartgrid.com.tw... - Page 12 Obtain an IP Address Automatically When connecting to the ISP, Billion SG6200NXL also functions as a DHCP client. Billion SG6200NXL can automatically obtain an IP address, subnet mask, gateway address, and DNS server addresses if the ISP assigns this information via DHCP.
- Page 13 Netmask: The default is 0.0.0.0. User can change it to other such as 255.255.255.0.Type the subnet mask assigned to you by your ISP (if given). Gateway: You must specify a gateway IP address (supplied by your ISP) Click on the Continue button and wait for your connection to be connected. www.billion.com.tw www.smartgrid.com.tw...
- Page 14 IP Address: Your WAN IP address. Leave this at 0.0.0.0 to automatically obtain an IP address from your ISP. Auth. Protocol: Default is Auto. Your ISP advises on using Chap or Pap. Click on the Continue button and wait for your connection to be connected. www.billion.com.tw www.smartgrid.com.tw...
- Page 15 Requirements for APN assignment varies between different service providers. Most service providers have an internet portal which they connect a DHCP Server to, giving you access to the internet i.e. Some 3G operators use the APN ‘internet’ for their portal. The default value of APN is “internet”. www.billion.com.tw www.smartgrid.com.tw...
- Page 16 1. Click SCAN to search for the available Wi-Fi device 2. Choose Wi-Fi device you want 3. Confirm the security type 4. Choose security mode 5. Choose security type 6. Click Apply, then the internet would be connected through wireless client. www.billion.com.tw www.smartgrid.com.tw...
- Page 17 Channel ID: Select the ID channel that you would like to use. Security Mode: You can disable or enable with WPA or WEP for protecting wireless network. The default mode of wireless security is Disable. www.billion.com.tw www.smartgrid.com.tw...
-
Page 18: Chapter 6: Energy Management Of Web Gui
Chapter 6: Energy management of WEB GUI SG6200NXL build simple ZigBee Application in WEB GUI, System Integrator can monitor real time power information and remote control ZigBee meter (SG3010, SG3015 serials) on the WEB GUI. 6.1 ZigBee Configuration Once ZigBee Meter joined ZigBee Network, this page will show on ZigBee information. - Page 19 6.2 Remote Control Advance->Power Management-> Meter Config Turn all ON: Turn all ZigBee nodes (within Relay) ON (Billion API support) Turn all OFF: Turn all ZigBee nodes (within Relay) OFF (Billion API support) Device ID: EUI64 of ZigBee nodes Application Name:...
-
Page 20: Remote Monitor
EUI64 of ZigBee Meters Appliance: Base on Alias Name Power Status: The current relay status of ZigBee Meter (Billion API support) Power information: Show Power information include Voltage, Current, Frequency, PF, Active Power, Apparent Power, Main Energy (Billion API support) Signal Strength: Show the Signal Strength between ZigBee nodes and next ZigBee nodes. -
Page 21: Chapter 7: Sg3010-T1/Sg3015-T1 Testing
7.1 Quick Installation for testing Regarding the installation for real environment, please refer UM of SG3015 7.2 ZigBee Configuration Advance->Power Management->Meter Config 7.3 Remote Control Advance->Power Management->Power Control 7.4 Remote Metering Advance->Status->Power Status Click Blue Link can see detail power information. www.billion.com.tw www.smartgrid.com.tw... - Page 22 www.smartgrid.com.tw...
-
Page 23: Chapter 8: Sg3010-T2/Sg3015-T2 Testing
5. Prepare a outlet with power cable. 1. Voltage input connects power cable with plug by connectors. 2. Plug into power outlet in order to measure the voltage. 3. Voltage output connects power cable with outlet by connectors. www.billion.com.tw www.smartgrid.com.tw... - Page 24 8.2 ZigBee Configuration Advance->Power Management->Meter Config 8.3 Remote Control Advance->Power Management->Power Control 8.4 Remote Metering Advance->Status->Power Status Click Blue Link can see detail power information. www.billion.com.tw www.smartgrid.com.tw...
-
Page 25: Chapter 9: Sg3010-T3/Sg3015-T3 Testing
1. SG3015-T3 connects power cable with plug by connectors. 2. Plug into power outlet in order to measure the voltage. 3. Current Transformer of SG3015-T3 clamps power cable of power outlet in order to measure the current value of power outlet. www.billion.com.tw www.smartgrid.com.tw... - Page 26 9.2 ZigBee Configuration Advance->Power Management->Meter Config 9.3 Remote Metering Advance->Status->Power Status Click Blue Link can see detail power information. www.billion.com.tw www.smartgrid.com.tw...
-
Page 27: Chapter 10: Sg3010-T4/Sg3015-T4 Testing
1. SG3015-T4 connects power cable with plug by connectors. 2. Plug into power outlet in order to measure the voltage. 3. Current Transformers of SG3015-T4 clamps same power cable of power outlet in order to measure the current value of power outlet. www.billion.com.tw www.smartgrid.com.tw... - Page 28 10.2 ZigBee Configuration Advance->Power Management->Meter Config 10.3 Remote Metering Click Blue Link can see detail power information. www.billion.com.tw www.smartgrid.com.tw...
-
Page 29: Chapter 11: Sg3010-Icb Testing
If you would like to quickly install SG3010-iCB for testing, you can refer the picture as below. Regarding the installation for real environment, please refer UM of SG3010-iCB. Prepare a plug with power cable Prepare an outlet with power cable 11.2 ZigBee Configuration Advance->Power Management->Meter Config Configured your meter www.billion.com.tw www.smartgrid.com.tw... - Page 30 11.3 Remote Control Advance->Power Management->Power Control 11.4 Remote Metering Advance->Status->Power Status www.billion.com.tw www.smartgrid.com.tw...
-
Page 31: Chapter 12: Besmart App Testing
Chapter 12: BEsmart APP testing Diagram The BEsmart APP connects SG6200NXL by WIFI, user can use BEsmart APP to control and monitor the ZigBee device from SG6200NXL. Download BEsmart APP Before using BEsmart APP, please download BEsmart APP from Google Play or APP store. - Page 32 BEsmart APP Login STEP-1 Check and modify SSID of SG6200NXL Before connect to SG6200NXL, please check SSID from WEB GUI. Advance->Configuration->LAN->Wireless STEP-2 Connect to SG6200NXL by WiFi www.billion.com.tw www.smartgrid.com.tw...
- Page 33 1. Read real time temperature and humidity data from sensor monitoring. 2. Control Rule for sensors Smart Lighting Control 1. Real time power control Lighting device. 2. Real time dimming lighting device. 3. Schedule power control and dimming. Settings: 1. Set BEsmart setting. www.billion.com.tw www.smartgrid.com.tw...
-
Page 34: Power Metering
Power Metering: 1. Check detail information of ZigBee device 2. Check detail power information of ZigBee meter measured. www.billion.com.tw www.smartgrid.com.tw... -
Page 35: Remote Control
After click Identify button, the ZigBee device will blink orange. Then you will know what device you are checking now. Remote Control If you would like to test the schedule function, please ensure the SG6200NXL connected to internet and get correct time. www.billion.com.tw...