Using Transport Extender - Billion BiGuard S10 Administration Manual

142 B G S10 FAQ
I UARD
QUESTION:
ANSWER:
QUESTION:
ANSWER:
QUESTION:
ANSWER:

Using Transport Extender

QUESTION:
ANSWER:
QUESTION:
ANSWER:
1. Click SSL VPN → User Access → Account.
2. Click Create.
What is the Client Address in Network Extender?
The Client Address is for an Administrator to set the IP range in order to distribute
IP addresses for Network Extender users.
What is the Client Route in Network Extender?
Client Route allows you to set routing rules for the Network Extender client user's
connection. For example, if the client user's internet packet's destination address
is specified in Client Route, the packet will be forwarded to the PPP connection
passing through the BiGuard S10 Series via the SSL VPN tunnel.
I have successfully created a Network Extender connection, but I cannot
access my corporation network, what is going on?
Ensure that your Client Address (192.168.1.210~192.168.1.230 by default) is in
the same subnet as your BiGuard S10 Series LAN network address
(192.168.1.254 by default). Alternatively, if your client address is not the same as
your BiGuard S10 Series LAN network address you have to add a client route to
your LAN network address as a routing table for Network Extender connection, if
you would like to access the LAN network resources.
What is Transport Extender?
Transport Extender is a feature that allows only specified Protocol and IP
addresses to be accessible with SSL encryption. This will provide more restricted
secure connections to only the specified IP address and port number. Transport
Extender can be used in services with static listening ports such as a POP3 or
SMTP Server.
How do I setup Transport Extender?
Use the following guide to set up Transport Extender.