Allowing Services; Figure 43 Pre-Defined And User-Defined Service Table; Figure 44 Adding Services To The Service Table - Billion BiGuard S10 Administration Manual

46 Administration Guide

Allowing Services

Click Service to display the list of allowable pre-defined and user-defined services:
FIGURE 43
The pre-defined list of services includes all normal networking services such as Telnet and Ping.
Click Create to add a user-defined service to the Service Table:
FIGURE 44
Name
Type
Service Port Start
Service Port End
Click Apply to confirm the settings.
P - U -
RE DEFINED AND SER
A
DDING SERVICES TO THE
Type the name of the service to be added.
Select the type of service from the drop-down menu:
• TCP: services involving transfer control protocol transmission.
• UDP: services involving user datagram protocol transmission.
• ICMP: services involving internet control message protocol trans-
mission. This option does not require you to set a service port start
and end value.
• GRE: services involving generic routing encapsulation transmis-
sion. This option does not require you to set a service port start and
end value.
• Others: other protocols. When you select this option, a text box
appears enabling you to type the protocol ID.
Type the port number or protocol ID that defines the beginning of the port
range that this service is allowed to use.
Type the port number or protocol ID that defines the end of the port range
that this service is allowed to use.
S T
DEFINED ERVICE ABLE
S T
ERVICE ABLE