Installing The Network Extender - Billion BiGuard S10 Administration Manual

84 Administration Guide
Application
Telnet
SSH
Web
WebSSL
RDP
VNC

Installing the Network Extender

The Network Extender is a web based plug-in that simplifies clientless remote access while
delivering full network connectivity for IP-based applications. The Network Extender enables
combined IPSec and SSL VPN in one solution, simplifying remote access deployments while
providing maximum flexibility for diverse remote access requirements.
To create a Network Extender connection follow the instructions below:
1. Click the Network Extender icon.
You are prompted to install an ActiveX control.
2. Click Install ActiveX Control.
3. You are prompted to install the adapter.
Definition
JAVA based plug-in protocol for accessing remote systems. Click on con-
nect and follow the on-screen instructions to complete the connection.
JAVA based plug-in interface for the secure transfer of files. Click on con-
nect and follow the on-screen instructions. Username and password is
required for login.
Click the icon to browse to a specified web page on the intranet or Internet.
Click the icon to browse to a specified web page on the intranet or Internet
with Secure Sockets Layering activated.
Multi-channel protocol that allows users terminal service connection to a
computer. Clients exist for Windows 2003 and later versions only. Click on
connect and follow the on-screen instructions. ActiveX plug-in must be
installed for client to be established.
JAVA based plug-in protocol (Virtual Network Computing) for the remote
control of another computer. Click on connect and follow the on-screen
instructions. User authentication is required.
NOTE: Y
OU MAY HAVE TO DISABLE POP
-
UP BLOCKERS TO PROCEED
.