Connecting Power; Turning On The Power And Checking Led Status; Figure 4 Connecting The Power Adapter - Billion BiGuard S10 Administration Manual
Ssl vpn security gateway
Hide thumbs
Also See for BiGuard S10:
- Specifications (2 pages) ,
- Quick start manual (2 pages) ,
- Product manual (20 pages)
Table of Contents
Advertisement
22
Getting Started
Connecting power
Connect the power adapter cable to the DC 12V connector on the BiGuard S10. Connect the
power adapter to an electrical outlet.
FIGURE 4
Turning on the power and checking LED status
Press the power switch on the rear of the BiGuard S10. The LEDs all blink once. The LEDs blink
in sequence from LAN to WAN. Then all LEDs blink once again. In about thirty (30) seconds, the
status LED turns off to indicate the system is operational.
C
ONNECTING THE POWER ADAPTER
Advertisement
Table of Contents
Troubleshooting
