Configuring The Virtual Server; Figure 58 Virtual Server Parameters; Figure 59 Adding A Virtual Server - Billion BiGuard S10 Administration Manual

54 Administration Guide
From Address
To Address
Schedule
Log
Click Apply to confirm the settings.

Configuring the Virtual Server

Click Virtual Server to view a list of virtual servers and their parameters.
FIGURE 58
Click Create to add a virtual server profile to the list.
FIGURE 59
Name
Active
Service
Internal IP
Address
Schedule
WAN IP Address
Select the origin IP address this filter will be applied to from the drop-down
menu.
Select the destination IP address this filter will be applied to from the drop-
down menu.
Select the schedule for when you want this profile to be applicable.
Check Enable to have the system create a log file when this filter is run.
V S
IRTUAL ERVER PARAMETERS
A V S
DDING A IRTUAL ERVER
Type the name of the virtual server.
Click Enable to activate this virtual server.
Select the service you want to assign to this virtual server.
Type the IP address you want to assign to the virtual server or click
Candidates to see a list of available internal IP addresses you can assign.
Select the schedule for this virtual server to be active from the drop-down
menu.
Select the WAN IP address from the drop-down menu.