Configuring An Active Directory Server - Billion BiGuard S10 Administration Manual

The manufacturer's website opens a registration page and your BiGuard S10's MAC
address is automatically added in the appropriate field. The serial number must be
typed in by the user.
2. Follow the instructions to fill out the rest of the form and register your
BiGuard S10.Configuring an Active Directory Server
This section describes how to configure an active directory server for use with the BiGuard S10.

Configuring an Active Directory server

Follow these instructions to configure an Active Directory server.
3. Click the Start button of your Windows PC.
4. Click Settings.
5. Click Control Panel.
6. Double-click Administrative Tools.
7. Click Configure Your Server Wizard.
NOTE: T
O REGISTER THE
USING THE WEB CONFIGURATION INTERFACE
. .
WWW BIGUARD COM AND CLICK
.
TRATION
NOTE: Windows Server 2000 and 2003 support the Active Directory server fea-
ture.
Configuring an Active Directory server
B G S10
I UARD WITHOUT
,
GO TO
P R -
RODUCT EGIS
151