Figure 33 Dhcp Server Configuration Screen - Billion BiGuard S10 Administration Manual

38 Administration Guide
FIGURE 33
Domain Name
Use Router as
DNS Server
Primary DNS
Server Address
Secondary DNS
Server Address
Default Lease
Time
Maximum Lease
Time
Range Start
Range End
Specify fixed MAC
Address Mapping
to fixed IP
Address
DHCP S
ERVER CONFIGURATION SCREEN
Type the desired domain name. If you are using the BiGuard S10 to
replace another device and do not want to change the original networking
environment, type the domain name for the previous device.
When this checkbox is selected, the DNS address that you type in the
Primary DNS Server Address field is assigned to stations on the LAN.
Type the primary DNS address that was provided by your ISP.
Type the secondary DNS address that was provided by your ISP.
Type the number of seconds (from 1 to 999999999) you want for the
default lease time. This is the time that the router can use an IP address
assigned by the DHCP server.
Type the number of seconds (from 1 to 999999999) you want for the max-
imum lease time. This is the maximum time that the router can use an IP
address assigned by the DHCP server.
Type the start IP address that the BiGuard S10 assigns to stations on the
LAN.
Type the end IP address that the BiGuard S10 assigns to stations on the
LAN.
This option lets you map a MAC address to a specific IP address; once
mapped the router assigns the same IP address to that station every time
it logs on to the LAN. See
address on page 30.
Mapping a MAC address to a fixed IP