Managing Network Extender Ip Address And Client Routes; Modifying The Network Extender Ip Address Range; Creating Client Routes; Figure 90 Network Extender Client Ip Address Assignment Screen - Billion BiGuard S10 Administration Manual

Managing Network Extender IP address and client routes

Use the Network Extender menu item to assign client IP addresses to enable client access.

Modifying the Network Extender IP address range

Users who log on using Network Extender are assigned an IP address when they log on. You
can change the IP address range in the Network Extender Client IP Address Assignment
screen.
FIGURE 90
Type the new IP address range parameters and click Apply.

Creating client routes

The Client Route item enables you to set routing rules for the Network Extender client connec-
tion. For example, if the client user's internet packet's destination address is specified in Client
Route, the packet will be forwarded to the PPP connection passing through the BiGuard S10
through the SSL VPN tunnel.
1. Click Client Route to view the Client Routing Table.
2. Click Create to add a new client route to the table.
3. Type the destination address and destination netmask in the Destination Address and
Destination Netmask fields. Click Apply to confirm the settings.
N E C
ETWORK XTENDER LIENT
Configuring SSL VPN Parameters
IP A A
DDRESS SSIGNMENT SCREEN
77