Managing Bandwidth Network Objects
Click Bandwidth Control to display the Bandwidth Table.
FIGURE 48
B
ANDWIDTH
Bandwidth control is used in conjunction with QoS functions. Bandwidth Network Objects are
selected when setting QoS parameters.
Click Create to add a new bandwidth Network Object to the Bandwidth Control Table.
FIGURE 49
A
DDING A
Name
Type the name for this bandwidth control Network Object.
Downstream
Type values for the downstream bandwidth in the text boxes in kilobits per
second.
•
•
Upstream
Type values for the upstream bandwidth in the text boxes in kilobits per
second.
•
•
Priority
Select the priority to be assigned to this bandwidth control item from the
drop-down menu, from 0 (highest) to 6 (lowest). The default is 3 (normal).
The value selected here determines which items in the bandwidth control
table get priority over the others for bandwidth access.
Click Apply to confirm the settings.
C
T
ONTROL
ABLE
B
C
ANDWIDTH
ONTROL
Guaranteed: type a value that defines the lower limit for down-
stream bandwidth.
Maximum: type a value that defines the upper limit for downstream
bandwidth.
Guaranteed: type a value that defines the lower limit for upstream
bandwidth.
Maximum: type a value that defines the upper limit for upstream
bandwidth.
Configuring the BiGuard S10
N
O
ETWORK
BJECT
49