Configuring The System; Setting The Time Zone; Figure 66 Adding An Ip Exception; Figure 67 Setting The Time Zone - Billion BiGuard S10 Administration Manual

C C
REATING A ONTENT
You can exclude specified IP address from the Content Filtering profiles you have set up.
Click Create under the Exception List to add an IP address exception.
FIGURE 66
Type in the IP address or click Candidates and select from available internal IP addresses.
Click Apply to add the IP address to the exception list.

Configuring the System

Use the System menu to set the time zone, configure remote access, set up passwords,
upgrade the BiGuard S10 firmware, backup and restore configuration profiles, and restart the
system.

Setting the Time Zone

Click Time Zone to open the Time Zone screen.
FIGURE 67
Time Zone
Local Time Zone
SNTP Server IP
Address
F E
ILTERING XCEPTION
A IP E
DDING AN XCEPTION
S T Z
ETTING THE IME ONE
Click Enable to allow the BiGuard S10 to automatically update the time
from the network time server. Click Disable to disable automatic updates.
Select your time zone from the drop-down menu. The time zone is set
according to Greenwich Mean Time (GMT).
Type the IP address or URL (for example time.windows.com) of the SNTP
(Simple Network Time Protocol) server.
Configuring the BiGuard S10
IP P
ROFILE
59