22
Administration Guide
Quick start to configuring the WAN
This section describes how to configure the BiGuard S10 with basic settings to get your network
up and running. There are three protocols for the router's WAN settings: PPPoE, Static IP, and
Obtain an IP Address Automatically (DHCP).
Configuring the WAN for Static IP
To configure the WAN for static IP, you will need the following information from your ISP:
•
IP address
•
Subnet mask
•
Gateway
•
DNS
Refer to the following to configure the connection:
1. Click Quick Start in the Menu bar.
2. Click WAN. The Quick Start WAN screen appears.
3. Select Static IP from the Protocol drop-down menu.
4. Type the IP address in the IP Address field.
5. Type the subnet mask in the Subnet Mask field.
6. Type the gateway in the Gateway field.
7. Type the primary/secondary DNS in the DNS fields.
Click Apply to confirm the settings.
Configuring the WAN for PPPoE
To configure the WAN for PPPoE, you will need the following information from your ISP:
•
User name
•
Password
•
DNS if necessary (contact your ISP for more information)
Refer to the following to configure the connection:
1. Click Quick Start in the Menu bar.