Backing Up And Restoring Configurations; Figure 70 Backing Up And Restoring Configurations - Billion BiGuard S10 Administration Manual

To upgrade the firmware:
1. Download the firmware image from the company Web site.
2. Click Factory Default Settings or Current Settings to determine how the router will
restart after the upgrade.
3. Click Browse to go to the location of the downloaded image.
4. Click Upgrade to apply the firmware patch.
5. Do NOT perform any more actions while the firmware is being upgraded.
WARNING:
UPGRADE BEFORE ATTEMPTING TO USE THE
DURING THE UPGRADE PROCESS
INOPERABLE

Backing up and restoring configurations

You can back up different configurations and restore them for flexible network management.
Open the Backup/Restore page by clicking on the Backup/Restore button, then select backup
all configurations or select only certain objects to your computer. Next click the Backup to save
your configuration.
FIGURE 70 B
ACKING UP AND RESTORING CONFIGURATIONS
To restore configurations, click the Browse button to select your backup file. The file address
will display in the Configuration File text box. Then click Restore to use the backup configura-
tions.
NOTE: Y
OU MUST CLICK THE
SCREEN TO MAKE YOUR CURRENT CONFIGURATION PERMANENT
saved configuration
NOTE: T
O RESTORE YOUR CONFIGURATIONS
FILE BEFORE STARTING
I '
T S RECOMMENDED THAT YOU ALLOW THE FIRMWARE TO COMPLETELY
(I
NCLUDING POWER LOSS
.
S C
AVE ONFIG BUTTON ON THE BOTTOM OF THE
62.
ON PAGE
.
Configuring the BiGuard S10
BiGuard S10. A
NY INTERRUPTION
)
MAY RENDER THE DEVICE
, S
EE
. Y
OU MUST HAVE AN EXISTING BACKUP
61
Restoring a